Cessna 185 Skywagon Supplemental Type Certificates (STCs)

459 STCs approved for the Cessna 185 Skywagon (A185F Skywagon) family · FAA quick reference

Quick reference only — not a compliance record. This list is for research convenience and may be incomplete or out of date. It is not an airworthiness compliance determination. Always verify against the official FAA record, and check directly with the FAA before relying on it. ADs are mandatory; STCs indicate approval for the type (not installation on a specific airframe); SAIBs are advisory.

Supplemental Type Certificates (STCs) approved for the Cessna 185 Skywagon type — FAA-approved modifications available for this aircraft family. Approval for the TYPE does not mean a given STC is installed on any individual airframe (that lives in the logbooks/337s).

Document	Title / Subject	Date
ST01515SE	Installation of heat shields for exhaust manifold heat deflection; manufactured and installed in accordance with Drawing List DL180, Rev. B, dated February 9, 2005, or later FAA approved revisions. — Oregon Aircraft Design LLC	2005-03-08
SA02211CH	Installation of a Three Point Torso Restraint System — Alpha Aviation Inc.	2005-11-15
SA2497CE	Establishes the compatibility to install the flap actuated aileron droop system per STC SA1441WE and the wing leading edge cuffs, drooped tips and stall fences per STC SA968CE. — Horton STOL Craft Inc	1989-05-12

+ 456 more STCs for the Cessna 185 Skywagon family.

The complete, searchable Supplemental Type Certificates list — with in-app PDF viewing and a combined download — is part of AeroTell.

See all 459 STCs in the AeroTell app →